Calibration Device
- Categories:About us
- Time of issue:2020-06-29 00:00:00
- Views:0
Our company invested more than 30 million in the construction of a calibration workshop of 5750 square meters in 2019, designed by Dandong Beite. Excavated and built a reservoir with a length of 110 meters, a width of 80 meters, and a depth of 3 meters, two 1000m3 water pumps, and three 3000m3 water pumps and 13 standard tables. Using METTLER TOLEDO's electronic ground scale and Krohne electromagnetic flowmeter, the diameter of DN2600mm pipe can be detected. It was be officially put into use in March 2020.
Liquid calibration device:
1. DN6-DN65mm static mass method and standard meter method water flow calibration device
Flow range: 0.1m3/h-70 m3/h
Device accuracy: 0.05%
2. DN80-DN300mm static mass method and standard meter method water flow calibration device
Flow range: 9m3/h-1300 m3/h
Device accuracy: 0.05%
3. DN350-DN2600mm standard meter method water flow calibration device
Flow range: 138 m3/h-11000 m3/h
Device accuracy: 0.2%
Gas calibration device:
The gas sonic nozzle is an advanced gas flow calibration device in China. The device is composed of 15 nozzles, and advanced technology and equipment are used in the design and construction process.
Nominal diameter: DN15~DN300mm
Flow range: 1~6000m3/h
Device accuracy: 0.3%
Device highlights:
After the air enters the stagnant container through the verification pipe section and the inspected flow meter, it flows through the critical flow venturi nozzle group, outlet container, buffer container, vacuum pump, etc., and is finally discharged into the atmosphere.
The gas discharged from the device enters the underground gas recovery cooling channel, and re-enters the air inlet of the device for recycling. In order to avoid inhaling gas of different temperature outside the laboratory when the flow is large, the gas temperature will fluctuate too much, which will affect the test results.
The stagnant container is a new type of thermal insulation and vibration isolation structure. It is equipped with a thermal insulation layer, which is filled with constant temperature circulating water to ensure that the temperature of each point in the stagnant container is consistent and improve the overall measurement stability of the device.
Professional manufacturer and exporter
of flowmeter equipment
Email:
Tel:
The Cross of 9th Avenue and 2th Longhai Road, Longting District, Kaifeng City, Henan Province, China.
HOT PRODUCTS
SEND US A MESSAGE
Email:
aylin18738997440@aliyun.com
WhatsApp:
+86-18738997440
Copyright © 2020 Kaifeng Baite Flow Instrument Co., Ltd.
豫ICP备20019609号
SEO