Good price and quality slurry electromagnetic flowmeter products is a unitless device that measures how fast liquid flow is in a slurry, whether it is moving through a pipe or through some other liquid.A liquid turbine flowmeter is built using a turbine block, a generator, and a fuel pump to produce a flow of molten metal or other liquid.Slurry FlowmeterSlurry flows are generated as a result of certain chemical reactions, such as those that combine sulfur with nitrogen or oxygen. For example, nitrogen combines with sulfur to form nitroso, which then creates nitrogen gas.The faster liquid flow through a slurry, the more likely it is to be a gas-based mixture. The higher the temperature, the more likely the mixture will be a gas.
Good price and quality slurry electromagnetic flowmeter products is provided for continuous operation.Integrated high temperature thermocouple with pressure sensor ensures accurate reading of battery performance while operating.Optimal cooling of the motor and sensors.Integrated DC voltage transformerIntegrated thermal management system to efficiently maintain temperature.Integrated external AC generator can provide power from any power supply for a long time.High output current is ensured by integrated DC power supply.The advanced micro cooling system reduces the output of the motor and the sensor temperatures significantly even under extremely high loading.Supplied with an external cooling fan for cooling of the motor, battery, and DC system for effective cooling.High quality components used in a high capacity power supply; excellent quality, rugged and reliable.High quality audio amplifier -Mains audio output.
slurry electromagnetic flowmeter with a high temperature of 250K was tested with a load of 1.8MW.The flow meter with a low temperature of 4K was tested with a load of 3.2T.The flow meter with a temperature of 700K was tested with a load of 3.8T. The heat generated by electrical discharge is distributed among the components of the flow meter.Figure 4 The heat generated by the electrical discharge is uniformly dispersed between the components of the flow meter.The heat generated by the electrical discharge is carried by the liquid at all points of the conductor and the water at the water-heater at a rate of 1.
Good price and quality slurry electromagnetic flowmeter products to measure how your liquid affects the surrounding fluid or gas, whether it is liquid, gas or mixtures of both. All liquids require the same level of pressure or flow (p) for their properties to be fully expressed. When a liquid is moving through a vessel, its flow velocity is limited by its density (p). The less dense the liquid is, the less it is free to move through the vessel. So while the more liquid there is, the better the flow rate because the density is greater.For example, consider a container of hydrogen (where the formula H +3CO 2 = 0) and a container of oxygen (where the formula H +3HO 2 = 0). At 1 foot in each direction, the density of the hydrogen is 2.8 g/cm3, and the density of the oxygen is 1.8 g/cm3.
Professional manufacturer and exporter
of flowmeter equipment
Email:
Tel:
The Cross of 9th Avenue and 2th Longhai Road, Longting District, Kaifeng City, Henan Province, China.
HOT PRODUCTS
SEND US A MESSAGE
Email:
aylin18738997440@aliyun.com
WhatsApp:
+86-18738997440
Copyright © 2020 Kaifeng Baite Flow Instrument Co., Ltd.
豫ICP备20019609号
SEO