SS304 sanitary milk flow meter products are very cheap.They require no wiring.They meet the high standards of the EPAYou can use 2 SS304 sanitary milk flow meter per 100 gallons.You can use multiple SS304 sanitary milk flow meter per 100 gallons.The water flow rate is easily controlled No wiring,No messy setup.You won't drain any other pumps Not expensive to buy.Can  cheap SS304 sanitary milk flow meter products also be used for waterless and waterless water tank systems?Yes, they can use it as a waterless tank system. It will work in waterless and waterless waterflow system without any additional equipment!  Cheap SS304 sanitary milk flow meter products can also work in waterless water tank system. waterless water tank system.

Working principle of cheap SS304 sanitary milk flow meter products.Sanitary milk flow meter has a water supply system that complies with the requirements  To satisfy the requirements, the SS304 sanitary milk flow meter products must be: Fittable in accordance with except as follows:i) If the flow meter is capable of detecting and accepting pressure above the minimum flow stage, the water supply system must be capable of detecting and accepting pressure above the maximum water use stage.ii) If the system accepts pressure above the maximum water use stage and is configured to detect and accept pressure above the minimum flow stage, the system must be capable of detecting and accepting pressure above the maximum flow stage.iii) The system must be capable of detecting pressure above the maximum flow stage and being configured for the minimum flow stage.

SS304 sanitary milk flow meter shall be maintained in a clean, safe, clean-looking, and sanitary condition.1. Unplug 2. Remove the meter and use your hands to separate the sanitary milk from other sanitary milk products. Note – it is normal to see a lot of lids on the sanitary milk as it is packaged.3. Disengage needle in pump and remove sanitary milk.4. Remove sanitary milk and replace the needle5. Close SS304 sanitary milk flow meter and let it run for 20 minutes. Note – this time is a good measure to run the meter so it does not cause the SS304 sanitary milk flow meter to go idle. After 20 minutes, it will restart and flow again.6. Remove sanitary milk and wash it in cold water with soap. Note – when you run the machine, the sanitary milk will appear dirty so you do not need to wash it.Cheap SS304 sanitary milk flow meter shall be in a good sanitary condition that enables it to function safely, not in condition that can cause illness or damage to other parts of the sanitary milk system. Maintenance of sanitary milk flow meter for nonmaternity and nonfathers-to-be systems:(1) Maintenance of systems not intended for use by nonmaternity or nonfathers-to-be. condition.(2) Maintenance of nonmaternity and nonfathers-to-be system.