Alcohol turbine flow meter products are designed to work best with ethanol. The alcohol turbine flow meter will not meet the high ethanol demands of some users, but because it is a low-cost unit you can do well with it and find other uses for it. Alcohol turbine flow meter products are good for use where low water pressure is needed. This type of system allows you to keep a higher flow rate since the water may still meet the demand requirements of the user (low pressure).How can you tell if the alcohol turbine flow meter is defective?This is an honest question. Some use it as a water pump, others use it as a gas pump. What can you tell? If the rotor head and the intake pipe cannot fit without problems, or are missing, this type of flowmeter is likely defective. Check you hose connections and try to see if you can see a "leak" in the flow.
Alcohol turbine flow meter products are useful for measuring alcohol loadThey are useful for monitoring the temperature within the tankWhen is a flow meter a waste of time?You should use one before filling your tank. You make sure the temperature before emptying it. This keeps you from storing alcohol in an area that can cause a higher concentration of alcohol to remain in the tank (more alcohol vapour).So when do I fill with alcohol?It is easy to fill a water tank with a little liquor or pure alcohol. When it is not safe to use in the tank, it is easy to reduce the alcohol to liquid and refill it with water! This is referred to as 'empty filling'. The best way to fill a tank is when you can safely do so. That can happen when you are leaving the house, when you are travelling, or even while you are working.
Alcohol turbine flow meter products to be designed so that it can meet the following conditions:1. For a vehicle: In all cases the vehicle should be designed and fitted with an alcohol turbine flow meter, so that the number of alcohol units that the engine . For a powerplant: In all cases the powerplant should be designed and fitted with an alcohol turbine flow meter, so that the number of alcohol units that the powerplant. In each case the alcohol turbine flow meter's output should be adjusted to the actual usage for the specific powerplants using alcohol turbine flow meter. The fuel consumption of each powerplant must be adjusted so as to avoid exceeding the alcohol turbine flow meter's output.
The alcohol turbine flow meter has been verified to 10 micron intervals and the measurements were consistent within the range of 0.7 to 10 microns.The measurement accuracy is measured in milli seconds (1/10,000th or 0.01 mS) which is consistent with commercially available measuring instruments that are used on the energy production market.Measures the flow rate of the alcohol flow turbine with a range of pressure and velocity.It can also be used to measure power loss and power balance or provide a baseline for calculations when power is being monitored in different systems.The measured output can be used to provide an indication of the peak or average output of the alcohol turbine as a function of fuel type.It can be used to provide power measurements during periods of high power output when the system operator has no opportunity to monitor output.
Professional manufacturer and exporter
of flowmeter equipment
Email:
Tel:
The Cross of 9th Avenue and 2th Longhai Road, Longting District, Kaifeng City, Henan Province, China.
HOT PRODUCTS
SEND US A MESSAGE
Email:
aylin18738997440@aliyun.com
WhatsApp:
+86-18738997440
Copyright © 2020 Kaifeng Baite Flow Instrument Co., Ltd.
豫ICP备20019609号
SEO