The following is an introduction to the selection of the installation environment of the good price and quality magnetic flow meter from China manufacturer. Using a suitable installation environment is the first and key step for us to realize the detection. After selecting the correct installation environment, we also need to conduct periodic visual inspection on the good price and quality magnetic flow meter from China manufacturer, check the surrounding environment of the good price and quality magnetic flow meter from China manufacturer, and check whether there are new strong electromagnetic field equipment nearby or new wires across the instrument.
1、 Selection of sensor installation environment of good price and quality magnetic flow meter from China manufacturer:
(1) It shall be avoided to install in the place where the ambient temperature is too high as far as possible. The electromagnetic flowmeter with integrated structure is also subject to the ambient temperature of electronic components, which should be lower.
(2) The sensor shall be installed in a dry and ventilated place to avoid damp, ponding and flooding places. Direct sunlight and direct rain pouring shall also be avoided as far as possible.
(3) There shall be no strong leakage current on the pipeline where the sensor is installed, and it shall be far away from the equipment with strong electromagnetic field as far as possible, such as large electromechanical and large transformer, so as to avoid electromagnetic interference;
(4) There shall be no strong vibration on the pipeline or ground where the sensor is installed, especially the integrated instrument;
(5) The location where the sensor is installed shall consider the space for on-site maintenance of staff.
2、 Selection of installation environment for converter of good price and quality magnetic flow meter from China manufacturer
(1) The ambient temperature is - 10 ~ 45 ℃;
(2) Relative humidity of air ≤ 85%;
(3) There is no strong vibration at the installation site;
(4) The surrounding air does not contain corrosive gas;
(5) The converter shall be installed indoors as far as possible. When installed outdoors, measures against sun and rain shall also be taken
3、 Precautions for installation of good price and quality magnetic flow meter from China manufacturer:
(1) The installation direction of electromagnetic flowmeter can be horizontal, vertical or inclined without restriction;
(2) Measure the vertical installation of solid-liquid two-phase fluid and flow from bottom to top;
(3) When installing horizontally, make the electrode axis parallel to the horizon, not perpendicular to the horizon;
(4) The electromagnetic flowmeter shall not be installed at the high point or top of the pipe system;
(5) The electromagnetic flowmeter shall also be installed away from or away from the downstream of the mixing point of two liquids with different conductivity
(6) There shall be sufficient space near the flowmeter for installation and maintenance;
(7) If the measuring pipeline vibrates, there shall be fixed supports on both sides of the flowmeter.
Good price and quality magnetic flow meter from China manufacturer is a shaped velocity flowmeter that uses the principle of electromagnetic induction to measure the flow rate of medium fluid. It is widely used in the flow measurement of industrial conductive fluid. Like other instruments, good price and quality magnetic flow meter from China manufacturer also has relatively strict requirements on installation environment.
Professional manufacturer and exporter
of flowmeter equipment
Email:
Tel:
The Cross of 9th Avenue and 2th Longhai Road, Longting District, Kaifeng City, Henan Province, China.
HOT PRODUCTS
SEND US A MESSAGE
Email:
aylin18738997440@aliyun.com
WhatsApp:
+86-18738997440
Copyright © 2020 Kaifeng Baite Flow Instrument Co., Ltd.
豫ICP备20019609号
SEO