Low price ultrasonic water flow meter For sale is a measuring instrument that is widely used now. Because of its strong practicability and many advantages, it is very popular. When installing Low price ultrasonic water flow meter For sale, we should comprehensively consider some factors. Generally, the factors that must be considered include: whether the pipe is full, ensuring stable flow, preventing scaling, medium temperature and pressure, interference, etc.
I Whether the pipe is full or not: the pipe section filled with fluid with uniform and dense material and easy for ultrasonic transmission must be selected, such as vertical pipe section (fluid flows from bottom to top) or horizontal pipe section.
II Ensure steady flow: the installation distance should be selected as the straight pipe section with no elbow, reducer or other uniform within the upstream of more than 10 times the straight pipe diameter and the downstream of more than 5 times the straight pipe diameter, and it should be far away from the interference sources such as valves, pumps, high-voltage electricity and frequency converters.
III Low price ultrasonic water flow meter For sale should avoid being installed on the highest point of the pipeline system or on the vertical pipeline with free outlet (the fluid flows downward)
IV For open or half full pipe, Low price ultrasonic water flow meter For sale shall be installed at U-shaped pipe section.
V The temperature and pressure of the installation point should be within the working range of the sensor, and the high-temperature medium should choose the high-temperature sensor.
Vi Fully consider the scaling condition of the inner wall of the pipe: Although the pipe without scaling is selected for installation, if it cannot be met, the scaling can be considered as the lining for better measurement accuracy.
VII The two sensors of the Low price ultrasonic water flow meter For sale must be installed in the horizontal direction of the shaft surface of the pipeline and within the range of ± 45 ° of the horizontal position of the shaft surface, so as to prevent the normal measurement of the sensor from being affected by the phenomenon of insufficient tubes on the upper part, bubbles or sedimentation on the lower part. If it cannot be installed horizontally and symmetrically due to the space limitation of the installation site, the sensor can be installed vertically or at an inclination angle under the condition that there is no bubble in the upper part of the pipe.


Professional manufacturer and exporter
of flowmeter equipment

Email:

Tel:

The Cross of 9th Avenue and 2th Longhai Road, Longting District, Kaifeng City, Henan Province, China.
HOT PRODUCTS
SEND US A MESSAGE
Email:
aylin18738997440@aliyun.com
WhatsApp:
+86-18738997440
Copyright © 2020 Kaifeng Baite Flow Instrument Co., Ltd.
豫ICP备20019609号
SEO