News

News

/
/
/
Working principle and characteristics of china china sanitary electromagnetic flowmeter products
Working principle and characteristics of china china sanitary electromagnetic flowmeter products
Data: 2022-01-23 21:25

Working principle of china sanitary electromagnetic flowmeter products:

1. China Sanitary electromagnetic flowmeter products is used to measure the volume flow of conductive liquid with conductivity greater than that of conductive medium. It is an inductive instrument to measure the volume flow of conductive medium.

2. In addition to measuring the volume flow of general conductive liquids, china sanitary electromagnetic flowmeter products can also be used to measure the volume flow of strongly corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspended liquids such as mud, pulp and pulp. It is widely used in industrial departments such as petroleum, chemical industry, metallurgy, light textile, papermaking, environmental protection and food, as well as in municipal management, water conservancy construction, river dredging and other fields.

3. China sanitary electromagnetic flowmeter products is composed of a transmitter and a converter. The electromagnetic flow transmitter is composed of a magnetic circuit system, a measuring conduit, an electrode, a shell and an interference signal adjusting device. It converts the change of flow into the change of induced potential.

4. The converter is composed of electronic components. It amplifies the weak induced potential and converts it into a unified standard signal output for remote indication, recording, integration and adjustment.

The product principle of china sanitary electromagnetic flowmeter. Next, what are the characteristics of china sanitary electromagnetic flowmeter products ?

Features of china sanitary electromagnetic flowmeter products:

1. The measurement is not affected by the changes of fluid density, viscosity, temperature, pressure and conductivity.

2. The converter adopts novel excitation mode, with low power consumption, stable zero point and high accuracy.

3. Reasonably select the sensor lining and electrode materials, that is, they have good corrosion resistance and wear resistance.

4. There are no flow blocking parts and pressure loss in the measuring pipe, and the requirements for straight pipe section are low. It has unique adaptability to slurry measurement.

5. The measurement accuracy is not affected by the changes of fluid density, viscosity, temperature, pressure and conductivity. The sensor induced voltage signal has a linear relationship with the average flow rate, so the measurement accuracy is high.

6. The converter can be integrated or separated with the sensor.

7. Because the induced voltage signal is formed in the whole space filled with magnetic field and is the average value on the pipe load surface, the straight pipe section required by the sensor is short and the length is 5 times the pipe diameter.

8. There is no choke in the measuring pipeline, so there is no additional pressure loss; There are no movable parts in the measuring pipe, so the service life of the sensor is very long.

The above is all about china sanitary electromagnetic flowmeter products introduced to you. I hope it will be helpful to you.
 

中国
韩国
韩国
韩国
韩国
韩国
这是描述信息

Professional manufacturer and exporter

of flowmeter equipment

这是描述信息

The Cross of  9th Avenue and 2th Longhai Road,  Longting District, Kaifeng City, Henan Province, China.

SEND US A MESSAGE

Verification Code
Chat Online

Email: aylin18738997440@aliyun.com     
WhatsApp: +86-18738997440

Copyright © 2020  Kaifeng Baite Flow Instrument Co., Ltd.     豫ICP备20019609号      SEO