PRODUCTS

Products 



User Manual

Partially full tube electromagnetic flowmeter.pdf

Size:

2024-11-27 08:59:51

Download

Download

Number of views:

1000

Non-full Electromagnetic Flow Meter

规格型号：

INTRODUCTION

Partially-filled electromagnetic water flow meter is used to measure the volumetric flow of conductive liquid and slurry in closed pipelines. It is suitable for chemical, electric power, metallurgy, petroleum, water supply and drainage, papermaking, medicine, food and other departments.

TECHNICAL DATA

Applicable Medium	Various conductive liquids
Nominal Diameter	DN6-DN3000mm
Flow Direction	Two-way measurement
Repeatability Error	±0.1%
Accuracy	±0.5%FS
Signal output	Pulse, 4-20mA, RS485, Modbus protocol; Hart protocol (optional)， Profibus DP (optional)
Relative humidity	5％-90％
Power supply	DC24V (20-36V)
Power supply	AC220V (85-250V)
Lining material	CR: -25-+60℃(wear-resisting)
	PU: -25-+80℃ (Strong resistance to wear and tear)
	PTFE: -25-+120℃ (Corrosion resistant)
	FPM: -25-+180℃ (High temperature resistant)
	F46: -25-+ 180℃ (Corrosion resistance; Resistant to high and negative pressure)
	PFA: -25-+ 180℃ (Corrosion resistance; Resistant to high and negative pressure)
Electrode material	316L (No corrosion/weak corrosion)
	HB (Resistant to non-oxidizing acid, alkali and salt)
	HC (Oxidation-resistant acid, alkali and salt)
	Ti (Chloride)
	Ta (Strong corrosion resistance)
	Pt (Apply to almost all chemicals except aqua regia and ammonium salts)
Nominal Pressure	DN50≤M4.0Mpa
	DN65-DN250≤l.6Mpa
	DN300-DN1000≤1.0Mpa
	DN1200-DN2000≤0.6Mpa
	Or other specified by order
Protection Grade	IP65; IP68

FEATURES

◆ Measurements are not affected by fluid density, viscosity, temperature, pressure and conductivit.

◆ No obstacles in the measuring tube, no pressure loss, low requirements for straight pipe section.

◆ The LCD backlight type converter can be easily displayed and read in the sun or in a dark room.

◆ Flow meter with bidirectional measurement system, built-in three totalizers: positive total, reverse total and total difference.

◆ It has various forms of output: current 4-20mA, pulse, rs-485, HART.

◆ The converter has self-diagnosis alarm output, no-load detection alarm output, flow upper and lower limit alarm, batch control (need to be customized)

and other alarm output functions.

APPLICATION

Our integrated electromagnetic water flow meter is a high-performance, high-reliability flow meter. Used to measure the volume flow of conductive liquid and slurry in closed pipes. Widely used in steel, electricity, petroleum, chemical industry, coal, metallurgy, papermaking, water supply and drainage, food, pharmaceutical industry, etc.